The Making of Alice | The Apron

This is the second part of the Making of Alice, which is focusing on the apron! You can see the 1st part of this tutorial HERE and pictures of the completed costume HERE

I drafted the pattern myself, which was pretty simple. For the bottom half I started with a rectangle, making it slightly smaller at the waist. For the top, I made it from three pieces. A rectangular piece for the front, marking where I wanted the neckline and shoulders on my dresform. Then on the back I have two pieces (one on each side) that are round and stitched at the shoulder seams and overlap in the back where I sewed a couple of snaps on.

Then there was the waist band, which was a simple straight piece. And lastly, the bow. Unfortunately I didn't get any pictures of the making of the bow because I was using a tutorial for it. That can be found HERE.

Anyways, let's get started! First thing I did was cut out all of my pieces form my fabric. I used a plain white cotton from Jo-Ann's.

Here's all my pieces (minus the waistband).

After I zig zagged all the edges I stitched the shoulder pieces together, right sides together.

I folded all of the side edges over 1/2" and stitched them down. I decided not to fold them over twice because it would have been too difficult with all of the tight curves around the neck and since I zig zagged the edges there was no worry of the fabric fraying.

Then I took my waistband piece and, placing the center front's of pieces together right sides together, I sewed them together with a 1/2" seam allowance.

Next I basted along the top edge of the bottom half apron piece with a 1/4" seam allowance. Using a basting stitch, I gathered the apron to the same size as the top half and lined it up so that the edges were flush on the top and bottom pieces and sewed it to the waistband. After that I ironged the waistband edges over 1/2 inch.

After the edges were ironed, I sewed along the entire waistband with a top stitch, on both sides

 And folded the ends over before hand sewing on a couple of snaps.

After that I made my bow and hand stitched on half of it onto the waist band and put a snap on the other half to snap onto the waistband.

Elsa Coronation Costume Analysis

My sister has been begging me to make her Elsa's coronation dress from Frozen pretty much since it first came out, so for her birthday I told her I would make it for her.

This post is going to be the analysis about the costume. I've been doing some research, looking for tutorials and while lot's of people have made this costume there aren't any tutorials or walkthrough's for replica's (there are several non-replica tutorials for little kids, but none for more accurate and complete costumes), so I'm going to do my best to document everything.

Due to budget restrictions, I'm not able to make the cape for her (yet at least) so I will be focusing on the actual dress and some of the accessories.

I'm planning on starting with Simplicity pattern 1210, which I bought a while back. While it has the right shape in the bodice and skirt, it's going to need to be fitted. I can tell that much just from the pictures and from my experience with Simplicity patterns.

The "dress" is made up of 3 pieces - the skirt, the bodice, and the black undershirt. Each of which are separate pieces. In addition, I'll probably need to add a petticoat.

The Bodice - The bodice is made up of 4 panels. Due to this being animated and not real, they failed to add any sort of closure to this costume. I'm undecided on weather I should make the back pannel into 2 pieces and split up the design on the back, or if doing a side zipper would be best.

The bodice will need to be fully boned. It has gold bias tape around the top and bottom edges, and decorative designs on the front and back. Because I don't have an embroidery maching (and I really don't want to hand embroider all this) I'm planning on cutting out the pattern peices from another material and top stitching it on the bodice.

Under Shirt - The black undershirt is fairly simple, with long sleeves pointed at the ends going over the top of the hands (I've been trying to figure out what this is called for forever, so if anyone knows please let me know!). It has a stand up collar, which will probably require a little bit of light boning. Then there's a design around the neckline which I will probably end up embroidering.

I'm still undecided, but I'm thinking about making the shirt sewn to the skirt, making it one piece. That way the shirt won't ride up while wearing it.

Skirt - The skirt is a basic floor length paneled skirt, but there's more embroidery around the entire bottom of the skirt. I'm unsure of how I want to tackle this, but I will probably end up painting that pattern on.

Fabrics - I'm undecided on what fabrics will be best for this costume. One thing I always disliked about this costume was that it was a coronation gown, in the middle of summer, and yet because of the fabric it looks like a winter dress (and not a very fancy one). I've seen people make this dress from satin and I think it looks gorgeous! But I'm going to leave the decision up to my sister. For the black shirt, I

I'll be starting this costume after the new year, so that's all for now!

The Making of Alice | The Dress

Whew, it's been a while since I said I was making this post. I haven't been working on costumes during the last month because of NaNoWriMo, and I finally decided to edit the photo's for this costume!

This post is about how I made the dress, and I'll do another post on the apron soon. I drafted the pattern for the dress myself. I originally wanted to do princess seams on the front and back, but I was having trouble draping it so I went with darts instead.

For the basis of the pattern I used a drafting tutorial for making a basic bodice block and then made a few modifications for it to fit my costume. For the sleeves I just drafted up a quick pattern. Nothing too complicated since they're gathered, measurements don't need to be precise for puffed sleeves (which is why they're my favorite kind of sleeves to sew! lol)

The fabric I used was a blue broadcloth that I bought at Jo-Ann's. I purchased 6 yards but I only used about 4 yards. I'm hoping that I'll be able to make Belle's blue dress with the remainders since the color is perfect!

Anyways, on to the skirt! I used my circle skirt pattern that I drafted up back in 2011. I used THIS tutorial to draft it. Since I had already made a skirt using this pattern I didn't bother with a mock up, but ended up adding 2 inches to the bottom of it.

Because of the width of the fabric I was able to cut the full skirt in just 2 pieces. Below is my pattern, the left side of the fabric is folded so that this piece forms half a circle. I cut two pieces like this for my skirt. I cut the second piece down the center to make it into 2 pieces for the zipper.

 Next I zig zagged all the edges of the skirt to prevent them from fraying. After that I stitched the skirt together with 1/2" seam allowance, leaving about 5 inches open in the center back where the zipper will go. Then I stay stitched around the waist to keep its shape.

Here's the un-hemmed skirt on my dress form with my petticoat. I ended up pulling the petticoat up higher and adding a 2nd petticoat to get a better silhouette.

Next up, the bodice. I cut all my pattern pieces out of my broadcloth as well as muslin to flatline the bodice, which gives it more support.

I zig zagged my flatlining onto my broadcloth to hold them together and to also keep the edges from fraying.

Then I marked and stitched my darts, and I sewed the front piece and the back bodice piece together at the side and shoulder seams.

Next I started the collar. I cut 4 pieces in the broadcloth and 2 pieces in muslin to use as an interfacing. I didn't bother to serge my collar pieces since no raw edges were going to be visible and neither of the fabrics frayed that bad.

I basted the muslin onto my bottom collar pieces...

Then with right sides together on the broadcloth pieces, I stitched the front and back layers together on each collar piece...

After that I clipped the corners and around the curves. You do this so that it will lay flat and not pucker. It basically helps the fabric be more flexible.

Then I turned them right side out and ironed them and set them aside for the time being.

This is what my sleep piece looked like. I didn't do any sort of flat lining on the sleeves, as I didn't feel like they require it. After zig zagging the edges, I basted around the top edge where I would gather them when I set the sleeves in the bodice.

Then I stitched the sleeve at the bottom seam before pinning the sleeve into the bodice.

At this point I gathered the top part of the sleeve and fit it into the arm hole, matching the bottom arm seam on the bodice to the sleeve.

 After the sleeve was stitched in, I hemmed it. A trick I started using is to draw with a fabric pen where you are folding the sleeve. It makes it easier to fold the fabric over where you want it opposed to ironing, especially when you are working with small sleeves.

I marked out 2 lines, 1/2" and 1" where I would fold the fabric.

 I pinned it, then stitch it, leaving an opening under the sleeve about an inch wide. This is where I put the elastic in.

To thread the elastic in I fold the elastic over at the end and put a small safety pin on the end. I usually don't cut the elastic until after it's threaded all the way through. It makes it easier to pull it through when you have more than you actually need.

After it's pulled all the way through I cut the elastic to where I want it, then stitch the two ends together. Then I folded the ends flat and stitch them down once more. This keeps it more secure and less likely to come undone, as well as makes it lay flatter.

Now I attached the skirt and the bodice, using a 1/2" seam allowance.

Here's the back, where I left the skirt open for my zipper.

 Next I stitched my zipper in. For this dress I used an invisible zipper.

Back to the collar... Here's my pieces after being ironed.

I decided to attached the collar with bias tape. I made the bias tape from my broadcloth so it would match, even though you shouldn't see it. This was my first time making bias tape, and it's actually quite fun! I'm looking forward to the next time I need to make some for a project. :)

The collar pinned onto the bodice...

With the collar pinned to the bodice, I took the bias tape and pinned it right side to right side of the collar and stitched it, stitching along the fold line of the tape (which I think was 1/2")

After that I understitched the bias tape to keep it flat on the inside. Then I laid it flat to the inside of the bodice, and whip stitched it down by hand.

After that I hemmed the skirt and TA-DA! One Alice in Wonderland dress done!

See how to make the apron HERE.